×

side roof frame decoration, door liner, sunshade panel, rear roof

side roof frame decoration, door liner, sunshade panel, rear roof

side roof frame decoration, door liner, sunshade panel, rear roof

Contact us

cooperationlike@gmail.com

A single material or laminated composite material used in automobile interior parts Such as cushions, seat backs, seat covers, seat belts, headrests, handrails, removable folding roofs, all decorative linings (including door panels, side panels, rear panels, roof linings), dashboards, debris boxes, indoor shelf panels or rear window sills, curtains, floor coverings, sunshades, wheel cover coverings, engine hood coverings and any other indoor organic materials It includes materials such as fillers and cushioning devices that absorb collision energy during a collision.

side roof frame decoration, door liner, sunshade panel, rear roof

Loquat in open field can be covered with sunshade net, straw and other anti-freezing measures at low temperature at night. If part of the citrus is left on the tree, it should be harvested in time. If it is too late, you can pick the upper part and leave some of the lower part of the fruit. In these two days of freezing or frost, you can also cover some sunshade nets, ground cloth, straw and so on, to delay the heat preservation of oranges in the greenhouse.

In the internal thermal insulation system, when the greenhouse or indoor temperature drops to the set low temperature limit at night, the thermal insulation quilt is turned off, the heat preservation of the greenhouse is strengthened, the ground radiation heat loss is reduced, the heating energy consumption is reduced, and the operating cost of the greenhouse is greatly reduced; the shade curtain can be opened during the day to make the greenhouse fully daylighting. The working principle is the same as that of internal sunshade, which is made of a lightweight quilt that does not absorb water and weighs between 100 and 150 grams.

side roof frame decoration, door liner, sunshade panel, rear roof

The interior design of the Lexus LS500 is even bigger for the traditional breakthrough. in terms of the composition of the profile, for the first time, the area in front of the co-pilot is also included in the main visual features of the dashboard, the sunshade above the center console is extended to both sides, and the panel on the side of the co-pilot echoes with the LCD screen.

Car interior parts include dashboard, door inner panel, steering wheel, seat, roof, floor mat, sunshade and so on. The surface of the interior decoration should be smooth, wear-resistant, heat-resistant, low-reflective, sound-absorbing and masking, and it is not easy to volatilize toxic gases in direct sunlight. At present, the amount of plastic used in automobile interior parts has accounted for more than 50% of the plastic consumption of the whole vehicle. PP is used as the main raw material to make a new type of automobile dashboard, which not only has good comprehensive properties such as toughness, strength and appearance, but also reduces the automobile cost, so it is widely used on the automobile dashboard. Nearly half of the materials made by European companies for automotive dashboards use PP, and this trend will continue to grow.

side roof frame decoration, door liner, sunshade panel, rear roof

Scope of application: polyurethane foam is widely used in automotive interior decoration and vibration absorbing parts, such as coating materials, polyurethane rigid plastic panels, polyurethane elastomers, seat soft foam materials, decorative parts, sofa leather, roof accessories; the most widely used is a variety of soft and hard polyurethane foam materials, which have vibration isolation, sound insulation, noise reduction, thermal insulation and thermal insulation. PU can also be made into automotive polyurethane coatings, binders, sealants and so on. The PU representative parts on the car are dashboard, rearview mirror, bumper, seat cushion, headrest, steering wheel, instrument panel anti-vibration pad, pillar decoration, front roof lining, window frame, ceiling and side roof frame decoration, door liner, sunshade panel, rear roof frame decoration and so on.

The main contents are as follows: 1) the structural design of the window should be reasonable. In the design of the building window, it should not only reflect the control effect of the window on sunlight, but also limit the volume ratio of the window to the wall. If the window area of the building is relatively large, endothermic glass or heat reflection glass can be used, and other shading measures such as balconies, curtains and sunshades can also be taken. If the outdoor temperature is low, natural air can be used as a direct source of energy. Therefore, when designing the construction of the window, you can set a natural pass on it that can open the shoulder;

1. The structure of the window should be able to control sunlight exposure and limit the area ratio of the window wall. For buildings with larger window area, endothermic glass, heat reflection glass or shading measures should be considered, such as sunshade panels, eaves, eaves, balconies, blinds, curtains and so on. Natural air can be directly used as a source of energy when the outdoor temperature is low, so the structure of the window should be able to open or set a natural vent on it.